CANoe VT System Training Classes

Germany
Austria
India
Sweden
Germany
Austria
India

Class Description for Vector India Pvt. Ltd.

India

ECU Tests with CANoe and VT System Workshop | 2-5 Days

Target Group
  • CANoe users in the test field
  • VT System users
Goals
  • Characteristics of the CAN and CAN FD protocol
  • Application Area of CANoe as a measurement and analysis tool
  • Using CANoe and CAPL for modeling and simulation
  • Using CANoe as testing tool
  • VT System planning, construction and operation
  • VT Modules, characteristics and application
  • Practical exercises
Facts
  • Duration: 2-5 Days
  • Training Hours: 9:30 - 18:00
  • Maximum Number of Participants: 10 Persons

Content

In this workshop you will acquire a fundamental understanding of CANoe as a development environment for CAN projects.

First the fundamentals of the CAN protocol are covered. Then you will learn how to operate CANoe as a measurement and analysis tool and for remaining bus simulation based on practical examples. You will use CAPL and special DLLs to create your own program node and the Panel Designer to create a graphic user interface window for emulating ECUs.

The VT System completes CANoe's testing capabilities. All ECU interfaces, i.e. communication buses, power supply, electronic inputs and outputs are under control of CANoe for testing purposes.

This workshop will use extensive exercises to plan and realize a VT System and use it in automated tests with a VC121 ECU. These tests allow full coverage tests in hard- and software.

Module 1: Introduction to CANoe
Duration:
3 Days
Target Group:
CAN Users (controller development, motor vehicle electrical, test planning and execution)
Prerequisites:
None
Goal:
Knowledge about serial bus systems in motor vehicles, physical characteristics of a CAN network and characteristics of the CAN and CAN FD protocol, understanding about data interpretation with a CAN data base, understanding the application area of CANoe as a measurement and analysis tool as well as using CANoe and CAPL for modeling and simulation
Agenda
  • Introduction to CAN
  • Characteristics of the CAN Protocol
  • CAN FD
  • Data Interpretation
  • Introduction
  • Start-up of CANoe for CAN
  • Measurement and Analysis
  • Data Logging and Offline Analysis
  • Send options
  • Introduction to Simulation and Modeling
  • Simulation and Modeling with CANoe for CAN
  • Creating Panels and integrating them
  • Introduction to CAPL
  • Signal Oriented CAPL
  • CAPL for CAN
Module 2: ECU Tests with VT System
Duration:
2 Days
Target Group:
CANoe users in the test field, VT System users
Prerequisites:
None
Goal:
Deep understanding of VT System capabilities and application areas, Planning and construction of a VT System, CANoe configuration and manual operation, Constraints to protect your hardware, Automatic and efficient CAPL tests
Agenda
  • VT System Introduction
  • Setup
  • Measurement and Testing
  • Other VT Modules

The module is very practice-oriented. You will specify, configure and setup a complete VT System. The VT System will check various properties of a VC121 ECU with realistic tests.

Class Description for Vector India Pvt. Ltd.

India

ECU Tests with CANoe and VT System Workshop | 2-5 Days

Target Group
  • CANoe users in the test field
  • VT System users
Goals
  • Characteristics of the CAN and CAN FD protocol
  • Application Area of CANoe as a measurement and analysis tool
  • Using CANoe and CAPL for modeling and simulation
  • Using CANoe as testing tool
  • VT System planning, construction and operation
  • VT Modules, characteristics and application
  • Practical exercises
Facts
  • Duration: 2-5 Days
  • Training Hours: 9:30 - 18:00
  • Maximum Number of Participants: 10 Persons

Content

In this workshop you will acquire a fundamental understanding of CANoe as a development environment for CAN projects.

First the fundamentals of the CAN protocol are covered. Then you will learn how to operate CANoe as a measurement and analysis tool and for remaining bus simulation based on practical examples. You will use CAPL and special DLLs to create your own program node and the Panel Designer to create a graphic user interface window for emulating ECUs.

The VT System completes CANoe's testing capabilities. All ECU interfaces, i.e. communication buses, power supply, electronic inputs and outputs are under control of CANoe for testing purposes.

This workshop will use extensive exercises to plan and realize a VT System and use it in automated tests with a VC121 ECU. These tests allow full coverage tests in hard- and software.

Module 1: Introduction to CANoe
Duration:
3 Days
Target Group:
CAN Users (controller development, motor vehicle electrical, test planning and execution)
Prerequisites:
None
Goal:
Knowledge about serial bus systems in motor vehicles, physical characteristics of a CAN network and characteristics of the CAN and CAN FD protocol, understanding about data interpretation with a CAN data base, understanding the application area of CANoe as a measurement and analysis tool as well as using CANoe and CAPL for modeling and simulation
Agenda
  • Introduction to CAN
  • Characteristics of the CAN Protocol
  • CAN FD
  • Data Interpretation
  • Introduction
  • Start-up of CANoe for CAN
  • Measurement and Analysis
  • Data Logging and Offline Analysis
  • Send options
  • Introduction to Simulation and Modeling
  • Simulation and Modeling with CANoe for CAN
  • Creating Panels and integrating them
  • Introduction to CAPL
  • Signal Oriented CAPL
  • CAPL for CAN
Module 2: ECU Tests with VT System
Duration:
2 Days
Target Group:
CANoe users in the test field, VT System users
Prerequisites:
None
Goal:
Deep understanding of VT System capabilities and application areas, Planning and construction of a VT System, CANoe configuration and manual operation, Constraints to protect your hardware, Automatic and efficient CAPL tests
Agenda
  • VT System Introduction
  • Setup
  • Measurement and Testing
  • Other VT Modules

The module is very practice-oriented. You will specify, configure and setup a complete VT System. The VT System will check various properties of a VC121 ECU with realistic tests.

Sweden
Did you find this page helpful?
E-Mail:

Please comment: