CANoe VT System Training Classes

Germany
Austria
India
Sweden
Germany

Class Description for Vector Informatik GmbH

Germany and all other countries

ECU Tests with VT System Workshop | 2 Days

Target Group
  • CANoe users in the test field
  • VT System users
Goals
  • Deep understanding of VT System capabilities and application areas
  • Planning and construction of a VT System
  • CANoe configuration and manual operation
  • Constraints to protect your hardware
  • Emphasis is put on automatic CAPL or vTESTstudio tests to use the VT System efficiently
Facts
  • Duration: 2 Days
  • Training Hours: 8:30am - 4:30pm
  • Maximum Number of Participants: 8 Persons

Content

The VT System completes CANoe's testing capabilities. All ECU interfaces, i.e. communication buses, power supply, electronic inputs and outputs are under control of CANoe for testing purposes.

This workshop will use extensive exercises to plan and realize a VT System and use it in automated tests with a VC121 ECU. These tests allow full coverage tests in hard- and software.

Module: ECU Tests with VT System
Duration:
2 Days
Target Group:
CANoe users in the test field, VT System users
Prerequisites:
CANoe experience, CAPL or vTESTstudio basics
Goal:
Deep understanding of VT System capabilities and application areas, planning and construction of a VT System, CANoe configuration and manual operation, constraints to protect your hardware. Emphasis is put on automatic CAPL or vTESTstudio tests to use the VT System efficiently.
Agenda
  • VT System Introduction
  • Setup
  • Measurement and Testing
  • Other VT Modules

The module is very practice-oriented. You will specify, configure and setup a complete VT System. The VT System will check various properties of a VC121 ECU with realistic tests.

Class Description for Vector Informatik GmbH

Germany and all other countries

ECU Tests with VT System Workshop | 2 Days

Target Group
  • CANoe users in the test field
  • VT System users
Goals
  • Deep understanding of VT System capabilities and application areas
  • Planning and construction of a VT System
  • CANoe configuration and manual operation
  • Constraints to protect your hardware
  • Emphasis is put on automatic CAPL or vTESTstudio tests to use the VT System efficiently
Facts
  • Duration: 2 Days
  • Training Hours: 8:30am - 4:30pm
  • Maximum Number of Participants: 8 Persons

Content

The VT System completes CANoe's testing capabilities. All ECU interfaces, i.e. communication buses, power supply, electronic inputs and outputs are under control of CANoe for testing purposes.

This workshop will use extensive exercises to plan and realize a VT System and use it in automated tests with a VC121 ECU. These tests allow full coverage tests in hard- and software.

Module: ECU Tests with VT System
Duration:
2 Days
Target Group:
CANoe users in the test field, VT System users
Prerequisites:
CANoe experience, CAPL or vTESTstudio basics
Goal:
Deep understanding of VT System capabilities and application areas, planning and construction of a VT System, CANoe configuration and manual operation, constraints to protect your hardware. Emphasis is put on automatic CAPL or vTESTstudio tests to use the VT System efficiently.
Agenda
  • VT System Introduction
  • Setup
  • Measurement and Testing
  • Other VT Modules

The module is very practice-oriented. You will specify, configure and setup a complete VT System. The VT System will check various properties of a VC121 ECU with realistic tests.

Austria
India
Sweden
Did you find this page helpful?
E-Mail:

Please comment: